Ezgo ST 400 CARB Owner's Manual download pdf (Page 10)

Page viii

Owner’s Manual and Service Guide

SAFETY INFORMATION

Refer to GENERAL SPECIFICATIONS for vehicle seating capacity.

Never modify the vehicle in any way that will alter the weight distribution of the vehicle, decrease its stability or

increase the speed beyond the factory specification. Such modifications can cause serious personal injury or

death. Modifications that increase the speed and/or weight of the vehicle will extend the stopping distance and may

reduce the stability of the vehicle. Do not make any such modifications or changes. The manufacturer prohibits and dis-

claims responsibility for any such modifications or any other alteration which would adversely affect the safety of the

vehicle.

Vehicles that are capable of higher speeds must limit their speed to no more than the speed of other vehicles when

used in a golf course environment. Additionally, speed should be further moderated by the environmental conditions,

terrain and common sense.

Operation of the vehicle is limited to persons above the height of 59 inches (150 cm).

GENERAL OPERATION

Always:

• Use the vehicle in a responsible manner and maintain the vehicle in safe operating condition.

• Read and observe all warnings and operation instruction labels affixed to the vehicle.

• Follow all safety rules established in the area where the vehicle is being operated.

• Leave vehicle when there is a risk of lightning.

• Reduce speed to compensate for poor terrain or conditions.

• Apply service brake to control speed on steep grades.

• Maintain adequate distance between vehicles.

• Reduce speed in wet areas.

• Use extreme caution when approaching sharp or blind turns.

• Use extreme caution when driving over loose terrain.

• Use extreme caution in areas where pedestrians are present.

MAINTENANCE

Always:

• Maintain the vehicle in accordance with the manufacturer’s periodic service schedule.

• Ensure that repairs are performed by those that are trained and qualified to do so.

• Follow the manufacturer’s maintenance procedures for the vehicle. Be sure to disable the vehicle before performing

any maintenance. Disabling includes removing the key from the key switch and removal of a battery wire.

• Insulate any tools used within the battery area in order to prevent sparks or battery explosion caused by shorting the

battery terminals or associated wiring. Remove the battery or cover exposed terminals with an insulating material.

• Use specified replacement parts. Never use replacement parts of lesser quality.

• Use recommended tools.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 163 164

No comments

Ezgo ST 400 CARB Owner's Manual Page 10